How to Install Libre Office in Backtrack 5 r1

BT5 r1
root@bt:~# add-apt-repository ppa:libreoffice/ppa
root@bt:~# apt-get update
root@bt:~# apt-get install libreoffice

good luck Selengkapnya...

create a new user in slackware

create a new user in slackware

# run the console
# adduser
Login name for new user []: inf

User ID ('UID') [ defaults to next available ]:

Initial group [ users ]:
Additional UNIX groups:

Users can belong to additional UNIX groups on the system.
For local users using graphical desktop login managers such
as XDM/KDM, users may need to be members of additional groups
to access the full functionality of removable media devices.

* Security implications *
Please be aware that by adding users to additional groups may
potentially give access to the removable media of other users.

If you are creating a new user for remote shell access only,
users do not need to belong to any additional groups as standard,
so you may press ENTER at the next prompt.

Press ENTER to continue without adding any additional groups
Or press the UP arrow key to add/select/edit additional groups
:  audio cdrom floppy plugdev video power netdev

Home directory [ /home/inf ]

Shell [ /bin/bash ]

Expiry date (YYYY-MM-DD) []:

New account will be created as follows:

---------------------------------------
Login name.......:  inf
UID..............:  [ Next available ]
Initial group....:  users
Additional groups:  audio,cdrom,floppy,plugdev,video,power,netdev
Home directory...:  /home/inf
Shell............:  /bin/bash
Expiry date......:  [ Never ]

This is it... if you want to bail out, hit Control-C.  Otherwise, press
ENTER to go ahead and make the account.


Creating new account...


Changing the user information for inf
Enter the new value, or press ENTER for the default
        Full Name []:
        Room Number []:
        Work Phone []:
        Home Phone []:
        Other []:
Changing password for inf
Enter the new password (minimum of 5 characters)
Please use a combination of upper and lower case letters and numbers.
New password:
Re-enter new password:
passwd: password changed.


Account setup complete.
Selengkapnya...

HOW TO RUN IN THE MODEM ICON 255 Slackware

FIRST
#connect the modem
#Run the console
#type the command  . / conninfo.ini on the console to make configuration
it will appear:
forexample XL

 
after that CTRL X to Exit

SECOND

after do the configuration.. we will run the modem
#./connect.sh  up  (connect)
#./connect.sh down (disconnect)
#./connect.sh restart (restart connection)




goog luck Selengkapnya...

Install Adobe Flash Player SlackWare 13.37

Adobe ® Flash ® Player is cross-platform, browser-based application runtime that provides a view without compromising expressive applications, content, and video across browsers and operating systems.
In this paper I will install the Adobe ® Flash ® Player as a plugin on the FireFox browser 4.0.Unduh latest Flash Player here

Next extract the files have been downloaded:
$ Tar-zxvf install_flash_player_10_linux.tar.gz

Make diretori plugins in / usr/lib/firefox-4.0 /
$ Sudo mkdir / usr/lib/firefox-4.0/plugins

Then copy the libflashplayer.so file to the directory / usr/lib/firefox-4.0/plugins /
$ Sudo cp libflashplayer.so / usr/lib/firefox-4.0/plugins /

Restart Firefox browser
Enjoy streaming video on Slackware:)

source by http://riscian.wordpress.com/2011/06/17/install-adobe-flash-player-slackware-13-37/ Selengkapnya...

How to Install ipscanner in LINUX

download this file .deb

http://www.angryziber.com/w/Download

after you download..

please do ...in folder u save the file .deb

then please

root@bt:~# dpkg -i ipscan_3.0-beta5_i386.deb

after that..

root@bt:~# ipscan

GOOD LUCK

Selengkapnya...

Restoring Grub Boot Loader Ubuntu

Boot using the Ubuntu Desktop LiveCD

- Open a terminal (Applications -> Accecoriess -> Terminal)

- Identification of ubuntu already installed on your computer, by typing the command:

code
$ Sudo fdisk-l

- Perform mounting the partition with the command:
$ Sudo mount / dev/sda5 / mnt

- Then install grub that has a mounted partition with the command:
$ Sudo grub-install - root-directory = / mnt / / dev / sda

if successful it will exit the message; install completed with no errors.

- Reboot your computer, Grub loader should have appeared

may be useful Selengkapnya...

Download UMPlayer for free

Video player for linux is cool
can play much better movie ..
UMPLAYER name ..

many advantages in this umplayer .. of which can directly search videos from youtube, to further please read and read on his official site
Please try it ..

Link  http://www.umplayer.com/download/

how to Install  

sudo add-apt-repository ppa:nilarimogard/webupd8
sudo apt-get update
sudo apt-get install umplayer

Selengkapnya...

How to beautify the terminal II (bashstyle-NG)

are confused about where to start writing ...: D
this time it may be said as a continuation of my previous post

about how to enhance your Linux terminal or console that we have
but the difference this time we will use tools help to do it ..:)
bashstyle-NG is a tool for editing graphics-editing console console us .. not only can we edit-edit with this tool, but a text editor applications that use a terminal / console such as vim and nano.

I certainly look forward to is not entirely dependent on these tools, meaning that it is better if we do while learning little by little about bash scripting can we do this ...:), premises with a view source on this tool ..

location of the source of these tools is on
usr / share / bashstyle-ng /

sajha directly in the process installasinya ...
very easy ..:)
please download the file here
http://code.google.com/p/bashstyle-ng/downloads/list

if you are a user ubuntu / debian then only the *. deb tingga take its course ..
then click 2x .. or can also use the terminal

# sudo dpkg-i-ng_7.8.1 bashstyle-1nano_all.deb

if your users debian-based distro that does not please her take-source *. tar.bz2 ...
(read readmenya)
or it could be in the following manner:
1. tar.gz file extract it
2. enter k foder extractannya
3. . / configure
4. make
5. sudo make install

nach I did not explain about using it, because I am sure you will understand after a successful installation:).
(live tick-tick sajha: D)

nach if still confused to use it please paste this:
file: / / / usr / share / doc / bashstyle-ng / index.html in your web browser (mozilla & sejenisnnya)

The following are some screenshots of this application.,

Good Luck
Selengkapnya...

IT is interesting Case

Web Hacking - Attacks and Defense


Book Category : Internet
ISBN 979-731-036-1
By Stuart McClure, Saumil Shah, Sheeraj Shah
16x23cm, 369pages
2nd Published, 2007

The hackers, either in the form of petty vandalism or in the form of large-scale cyber robbery, entered the world of the Web along with everyone else. Organizations that implement Web-based business applications face increasing risks. Book Web Hacking: Attacks and Defense is a guide to obtain the latest information about the attack on the Web and defenses. McClure Stuar a security expert (author of the book Hacking Exposed), Saumil Shah and Shah Sheeraj bring widely diverse forms of attack on the Web and how the defense against it.

Readers both beginners and experienced, will gain an understanding of how the hacking on the Web and can improve skills in developing models of defense against such attacks. Technologies discussed include Web programming languages ​​and protocols, protocols, and Web and database systems, pambayaran and shopping trolleys, and the principal weaknesses in the URL.
The main points of discussion include:
Glance on the Web and what is the target of hackers.
Methods for a complete Web application security
Detailed analysis of hack techniques
Prevention methods
What can be done to take a commission weaknesses
Case studies and scenarios assault
Tools, methods, and advanced Web technology hacking.
by http://virga-06.blogspot.com/2009/01/kasus-it-yang-menarik.html#comment-form Selengkapnya...

how to restore your grub

maybe time to reinstall windows.,. or something that causes us ga grub look ..: D many ways you can do to restore grub in linux, brief, the following is the way I often use to snatch back the lost grub loader .. heee ....
booting from live CD, truz open the terminal ...
sudo fdisk-l

   Device Boot Start End Blocks Id System / Dev/sda1 1 9726 78124063 + 7 HPFS / NTFS / Dev/sda2 * 12159 21717 76782667 + 7 HPFS / NTFS / Dev/sda3 9727 12158 19526753 + 5 Extended / Dev/sda4 21 718 30 401 83 Linux 69,754,230 / Dev/sda5 10 787 9728 8514450 82 Linux swap / Solaris / Dev/sda6 10788 12158 11011072 7 HPFS / NTFS
Partition table entries are not in disk order

hiyaaa .... linux partition is on / dev/sda4 / next:
sudo mount-t ext4 / dev/sda4 / mnt / sudo mount-t proc proc / mnt / proc / sudo mount-t sysfs sys / mnt / sys / sudo mount-o bind / dev / / mnt / dev / sudo chroot / mnt / bin / bash
adjusted peritah
sudo mount-t ext4 / dev/sda4 / mnt / <<
with command2 is already typed in above, we can see the results at the terminal, that we actually get into the linux system that is in HD, but we take only the terminal sajha (/ bin / bash)
now lives sajha grub reinstall it:)
grub-install / dev / sda grub-install / dev/sda4

Good Luck

Selengkapnya...

7 tips & triks installasi BT 5

This time I share tips about a few things to be done & on time & will consider installing BT 5as we all know that the backtrack team has just issued a new release,,:)but also a variety of problems in the face of friends in doing the installation.without winded width let's discuss one by one
1. VGA as if not in support

  after "startx" black blank screen .,.:(This problem arises because the existing script grub.cfg nomodesetmore or less like this:# # # BEGIN / etc/grub.d/10_linux # # #menuentry 'Ubuntu, with Linux 2.6.38' - ubuntu class - class gnu-linux - gnu class - class os {
        recordfail
        insmod ext2
        set root = '(hd0, 4)'
        search - no-floppy - fs-uuid - set 4e732f15-95f4-47bf-ad22-a21c890674ca
        linux / boot/vmlinuz-2.6.38 root = UUID = 4e732f15-95f4-47bf-ad22-a21c890674ca text ro splash vga = 791 nomodeset
        initrd / boot/initrd.img-2.6.38
text command nomodeset splash vga = 791 mean machine / laptop we are forced to follow the default settings provided by VGA at devloper backtrackto overcome his nomodeset please delete it and then add the 0x in front of hex numbers,so it looks like:# # # BEGIN / etc/grub.d/10_linux # # #menuentry 'Ubuntu, with Linux 2.6.38' - ubuntu class - class gnu-linux - gnu class - class os {
        recordfail
        insmod ext2
        set root = '(hd0, 4)'
        search - no-floppy - fs-uuid - set 4e732f15-95f4-47bf-ad22-a21c890674ca
        linux / boot/vmlinuz-2.6.38 root = UUID = 4e732f15-95f4-47bf-ad22-a21c890674ca text ro splash vga = 0x791
        initrd / boot/initrd.img-2.6.38
thus automatically operating system (backtrack 5), will adjust the resolution with our VGA cards, so now we can see the desktop backtrack. AMEN.

then please do the installation:) with comfortable ..:)
Selengkapnya...

SET on backtrack 5 (multi tabnabbing)

How are u all friends ???

This is a tutorial on SET (social engennering toolkit)

and that became our discussion is a multi tabnabbing .,.:)

of several attacks that can be embarked with tools this one ...:)

This is a matter of Malang Univ workshop on 21 May 2011

thanks for committees and all participants .,.:)

please maav if a lot of the flaws.. because that perfection belongs only to Allah alone ...:)

okay.. I try to explain what is necessary sajha friends noticed ..:)

The first of each attack must have the flaws and strengths masing2.,.)

liad friend when the attack could this be done / in combination with spoofing techniques .,.:)

& try to compare with that do not use spoofing ..

compares very simple way.,

try to directly access IP address spoofing attacker done without user input the same password then dsna .,.:)

then try waged by spoofing.. can see where the weaknesses of such an attack is ..:)

which both make sure the apache web server is off ...

because by default Apache will be run by the SET

for more details, please download the video tutorial:)

http://www.4shared.com/file/Bh7ZYeSd/multi_tabnabbing.html

Total files * zip: 28.363 KB | 2011-05-21 |

video formats: * ogv (linux dedicated)

This slideshowny I uploadkan also:

http://www.box.net/shared/zjpfqlzv85

I hope what I give is useful to broaden the friends of all .. AMEN ..

survived overnight week to the celebration .,.:)

"Do not take the crown, if not have a throne"

Source by http://www.devirakhjib.uni.cc/2011/05/set-on-backtrack-5-multi-tabnabbing.html Selengkapnya...

run as root chromium-browser (BT 5)

why my google chrome can not run as root it?

hee ....
do not be discouraged ...

follow my suggestion ...

Please open your terminal

then typing in a terminal the following command

root@bt:~# hexedit /usr/lib/chromium-browser/chromium-browser

that the numbers of hexa decimalnya..: p
that many of the dots were in the form of ascii

press [TAB] to move into the its ascii mode.

Your task now is to find the word "geteuid"
press ctrl + s type geteuid,,, ctrl + s = search.
easy?

last lived instead of just writing "geteuid" so "getppid"

can not?

make sure corsor shape on the right fonts will be deleted ...
continue to delete using backspace ... the letter is not lost ... tp try to input the letter that we will change

Ok now you can run your Browser please

Selengkapnya...

The Social-Engineer Toolkit (SET) v1.4 “YAY DerbyCon” Edition has been released.

The Social-Engineer Toolkit v1.4 “YAY DerbyCon” Edition has been released. The main new feature with this is the new addition into the web attack menu. SET now has the ability to help aid in steps needed in creating a code signing certificate. You still need to purchase the code signing certificate, but it will not be directly imported into SET and into the Java Applet attack making the attack much more believable and make the attack much more reliable. Overall, through doing the steps myself, it will cost you around $300-350 to get everything setup. You’ll need to register a business with the state (which takes 5 mins), wait for your papers, then purchase a code signing certificate and sign the applet with whatever you made your business name. Sounds like a bit of a process I know, but when doing consulting engagements, should be easy to purchase a code signing certificate based on your company name or just register a quick LLC to get it.
Amongst this addition are a number of bug fixes and additions. Full change log can be found below:
~~~~~~~~~~~~~~~~
version 1.4
~~~~~~~~~~~~~~~~
* Java changed how self signed certificates work. It shows a big UNKNOWN now, modified self sign a bit.
* Added the ability to purchase a code signing certificate and sign it automatically. You can either import or create a request.
* Fixed a bug in the wifi attack vector where it would not recognize /usr/local/sbin/dnsspoof as a valid path
* Fixed a bug in the new backtrack5 to recognize airmon-ng
* Added the ability to import your own code signed certificate without having to generate it through SET
* Fixed an issue where the web templates would load two java applets on mistake, it now is correct and only loads one
* Fixed a bounds exception issue when using the SET interactive shell, it was using pexpect.spawn and was changed to subprocess.Popen instead
* Added better import detection and error handling around the python module readline. Older versions of python may not have, if it detects that python-readline is not installed it will disable tab completion
* Added a new menu to the main SET interface that is the new verified codesigning certificate menu
* Fixed a bug with the SET interactive shell that if you selected a number that was out of the range of shells listed, it would hang. It now throws a proper exception if an invalid number or non-numeric instance is given for input
* Added more documentation around the core modules in the SET User_Manual
* Updated the SET_User manual to reflect version 1.4


source : http://www.secmaniac.com/ Selengkapnya...