TRouble Flashdisk

Yesterday, when I try to keep the data in flash disk suddenly there is message box aja kaya gini
His first shock was also "why?" I finally decided not to be kept on the flash disk, continues to try deleting the file eeeh I can not also, in my heart "paraah wah ya". Finally I wrote a flash putusin want formatted disc may be taxable virus.Ternyata not CAN FORMAT! Oh no how ya this time I want to throw a flash disk? I finally had time to think for a moment aja putusin find information on google. and the results met these articles:
Knowledge in this article are:
* Flash Disk experienced Write Protect Error* You can not remove files or include files into Flash Disk* Attempts to format the Flash Disk Write Protect to get the message* Flash Disk sometimes experience the same thing when used by different computers. And still can not be used by your computer, although sometimes can work on another computer
Messages displayed in Windows XP:
In the first message, a message pops up when done format
Messages to 2 when the files do write files or move files to a flash disk
3 is a message to other posts when the flash disk inserted data from the hard drive



Tip with CHKDSK and formats through the Dos Prompt:
1. Go to the Windows XP DOS prompt and type CHKDSK / F Drive Letter: (chkdsk / fv:)2. Completed checking of Check Disk (CHKDSK), you try to dispose of existing files in Flash Disk drive letter with the Del command :*.*. Examples of command remove a file from the Flash Disk in drive V: is DEL V: *.*3. Once again you try to format with the command Dos Promt. Format V:4. Or use the way through the Computer Management and see the drive volume V, and you try to format. If there are still doing the boot error message on computer
Phase 1


Phase 2



Phase 3.4

Result
Flash disk you have is corrupt. Ways mentioned above is to repair the corrupted files flash disks and experience protect files when copying or moving data and can not do the format.
Finish doing the format on the Flash Disk, but you get the same message when doing a format. Try to do the boot on the computer to refresh the Windows XP to recognize your Flash Disk. If still experiencing the same thing, you try to repeat back to chkdsk, if there is still an invalid message link. If you still experience the second time it is, the way that we provide does not apply to your flash drive ;-)
Case Flash Drive Write Protect is sometimes only happens on one computer while some time still can be used by different computers. But it can also directly occur on all computers that when you connect the USB Flash Drive you well on Windows XP or other OS
Another thing could have made an error on your flash drive and not necessarily due to corrupt files that make the case as above.

Almost everyone is familiar with the flash disk. And almost everyone already has a flash disk. Indeed, one of a data storage device is very helpful for someone. With its smaller and varied, along with a starting capacity of large, flash has become a necessity. Moreover, the price of this thing getting "dropped" sharply.
As more and more people have a flash disk, so the more people who experience problems with the flash disk can not be read from again, each entered request message to be formatted or if entered on another computer does not read and vice versa if our computer safe and many other problems.
For that I tried to, for science to overcome the problem of flash disk:
The first is we can do with the way through Dos Prompt, how? nah follow the following steps:
Click the windows button and the letter R on the keyboard, it will display the RUN dialog box, write the command COMMAND in addition to writing the column exactly openand then will go to command promt, usually bertuliaskan C: \ document \ ownwer>There, type CHKDSK after owners> examples CHKDSK / F: (then enter) if your disk layout Flas drive in F and apaila in G or H. .. then he wrote that according to the drive.
Furthermore, when finished check of Check Disk (CHKDSK), you try to dispose of existing files in Flash Disk drive letter with the Del command :*.*. Examples of command remove a file from the Flash Disk in drive F: is DEL F: *.*Once again you try to format with the command Dos Promt. Format F:
The second way is through the computer management:

Select drive F or drive your flash drive, then right click and select formatIf there are still doing the boot error message on computerThe way this is to repair the corrupted files flash disks and experience protect files when copying or moving data and can not do the format.
Finish doing the format on the Flash Disk, but you get the same message when doing a format. Try to do the boot on the computer to refresh the Windows XP to recognize your Flash Disk. If still experiencing the same thing, you try to repeat back to chkdsk, if there is still an invalid message link. If you still experience the second time it is, the way that we provide does not apply to your flash drive.
Case Flash Drive Write Protect is sometimes only happens on one computer while some time still can be used by different computers. But it can also directly occur on all computers that when you connect the USB Flash Drive you well on Windows XP or another OS.
Another thing could have made an error on your flash drive and not necessarily due to corrupt files that make the case as above.
Currently, Flash Disk (FD) be an a device that can be said must have people other than HP, sometimes common problems encountered in FD and sometimes from the ngurusin fFD bother mending yg eror've just bought. Before you convict a USB flash disk you are in trouble, make sure it was not the system / PC is wrong:1. Check the USB cable extender (extension) ---> max limit of 1.5 mtr. If more an interruption occurs and often causes problems. If you need more cable length, it is advisable to use a USB hub that use power2. USB Hub (USB port splitter) circulating in the market generally does not use power to help the stability of the voltage. If more than 1 USB device connected to a USB hub and no help from the power adapter, usually terjadia problems that quite disturbing.3. Mobonya USB port (often front USB panel accidentally reversed the circuit and damage the USB port). Some problems come from the fact that even a USB port which is behind the Mobo, check if there is no problem at Mobo4. OS / Windows troubled in drivers / clashing with drivers from the UFD. Remove all drivers who are not properly installed and have problems in Device Manager.Different story if the flash drive when plugged into the computer win XP, is being used but the windows suddenly hank aka frozen. After booting the computer in force and in turn it on again, it turns out that embedded flash disk was dead. Falsh disk can not work anymore. Windows detects the capacity 0 MB and issued a message to format. Tried to be formatted failed as well. Finally, not used anymore Flash diskIf it's cases like this are naturally against damage in flash disks do not worry we can still try to save and menghidupkanya again. Here are the steps to fix it:1. Softawre that we need for this purpose is the HP Drive Boot Utility (made by HP but do not worry it turns out we can use to brand the other even for camera memory can also be).2. Once downloaded, run / install and select the drive to falsh disk that will be corrected.3. Choose the type of disc format that would in use (FAT, FAT32 or NTFS)4. Select the Quick Format5. Then select start to start.
Perhaps the problem tehadap Lots of flash, one on Flash disks whose data can not be in the Copy to Computer or Copying data from computer to flash can not. or also you can not remove files or include files into Flash Disk, Attempts to format the Flash Disk Write Protect to get the message. Flash Disk sometimes experience the same thing when used by different computers. And still can not be used by your computer, although sometimes can work on another computer
Well that was a small problem of the flash that we often encounter, the problem is often referred to as "flash Write Protected" or "flash can not copy / write",And this is the message displayed in Windows XP:In the first message, a message pops up when done formatMessages to 2 when the files do write files or move files to a flash disk3 is a message to other posts when the flash disk inserted data from the hard drive


And now imam77 will discuss about how to fix the flash is write protected,Tip with CHKDSK and formats through the Dos Prompt:1. Go to the Windows XP DOS prompt and type CHKDSK / F Drive Letter: (chkdsk / fv:)2. Completed checking of Check Disk (CHKDSK), try to remove the files you have on the Flash Disk drive letter with the Del command :*.*. Examples of command remove a file from the Flash Disk in drive V: is DEL V: *.*3. Once again you try to format with the command Dos Promt. Format V:4. Or use the way through the Computer Management and see the drive volume V, and you try to format. If there are still doing the boot error message on computerPhase 1
Phase 2
Phase 3.4
ResultFlash diskmumengalami corrupt. Ways mentioned above is to fix the corrupted files flash disks and experience protect files when copying or moving data and can not do the format.Finish doing the format on the Flash Disk, but you get the same message when doing a format. Try to do the boot on the computer to refresh the Windows XP to recognize your Flash Disk. If still experiencing the same thing, you try to repeat back to chkdsk, if there is still an invalid message link. When the second time you still have it, the way that we provide does not apply to flash diskmu.Case Flash Drive Write Protect is sometimes only happens on one computer while some time still can be used by different computers. But it can also directly occur on all computers that when you connect the USB Flash Drive you well on Windows XP or another OS.Another thing could have made an error in your flash disk and not necessarily due to corrupt files that make the case as above.Or By the way:How 1:1. Go to regedit2. Msuk to HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Contro l \ StorageDevice \ Policies3. Double click on the string 'WriteProtect' then change the Value data to '0 '4. Then repeat step number 3 in tiap2 folder with the name 'ControlSet ***' etc. (there are all in the system).5. After everything is finished, try deh tuh format flash disk / contents / Copas files to / from flash disk trsebut.
Method 2:1. Open the Control Panel2. Open Administrative Tools3. Go to Computer Management4. Under the Storage in the left pane, click Disk Management5. Select the Flash Disk write protected reply6. Right click then select "Delete Partition"7. After the finish, right click again then select "Create Partition".
Mode 3:1. Go to the DOS promt (Win + R type cmd) Windows XP and type CHKDSK / F Drive Letter: (chkdsk / fg)2. Completed checking of Check Disk (CHKDSK), try deh dispose of existing files in Flash Disk drive letter with the Del command :*.*. Examples of command remove a file from the Flash Disk in drive G: is DEL G: *.*3. After ntu try deh format with the command in Dos Promt, Format G:Hopefully, your flash can be fixed!
For those of you who are experiencing problems with flash, in particular the case of flash is detected in Windows but not in a format you can use some of the following ways to fix it:Format flash through Linux / Linux LiveCD(Original page: http://linux.or.id/node/2835/)Steps should be taken:1. Boot the computer using a Linux LiveCD, Slax KillBill eg, Knoppix or other distributions,2. After logging into the system, enter the flash that had troubled to any USB port. For the sake of data security, make sure that only the troubled flash are installed,3. Make sure your flash is detected, or at least led indicator flame,4. Go to console5. In the console run cfdisk / dev/sda1 (adjust the flash to how that is attached),6. Delete or remove a partition on the flash,7. Create a new partition by selecting Create New | Write,8. Save the changes you've just done,9. Format flash mkfs.vfat by typing command-f32 / dev/sda1 on the console.10. Your flash has a new partition, so that it can be reused either in Linux or in Windows.Format USB flash Using Disk Storage Format ToolIn addition to the above, you can also use the tools that are issued by third parties. One of them is Hewlett Packard (HP). Although this tool released by HP, but utilization can also be used to flash other brands.The following steps do not fix the flash that can be formatted using the HP USB Disk Storage Format Tool:1. Download the HP USB Disk Storage Format Tool here,2. Install the application, recommendations OS used is Microsoft Windows 2000, Windows 2003 Server and Novel Netware,3. Enter the flash is problematic to any USB port. Make sure your flash drive is detected and received allocations on Windows,4. Run the application of the HP USB Disk Storage Format Tool5. Specify the drive where the flash is mounted,6. Select Create New or Replace Existing Configuration to create a new partition and erase the existing configuration in the flash,7. Format your flash in accordance with the desired file system.